Rigid heddle workshop – jan 21, 2012

21 01 2012

Today was the scheduled Rigid Heddle Workshop. There were 4 openings in the class, 3 registrants. As the day greeted us, it was cold and very wet. I was glad to have a workshop scheduled, rather than a bike ride.

We began at 9 am with winding yarn balls from skeins, and found this a good way to begin class since students often arrive in stages and yet the first student should be able to begin at the scheduled start time.  by 9:30, we were well on our way to measuring out the warp.Each student in class had her own loom and each loom had a stand. This makes for easy weaving, I think. The warp is Louet’s washable merino. Perhaps Pearl. Each student’s project was to be a 10″ scarf. One student had dressed her Kromski Harp previously.

The student with the Ashford Rigid Heddle Loom direct warped her loom, while the Kromski owner measured her warp on the warping board on the back of the loom. Using this method of direct warping, we sley each slot and dot, rather than double sleying the slots only, then re-sleying after beaming. It was easier, however to double-sley from a front installed set of lea sticks on the Kromski. The loom owner said this was more clear for her than the method she used previously. Love to hear that! The looms were dressed in record time.  Since the Ashford loom arrived with a cardboard version of warping sticks, we used them: For the Kromski, we simply used bathroom tissue for warp separator.  Both ladies were weaving very quickly after lunch. We had a warm bowl of chicken soup and biscuits for lunch by a fire provided by my DH. Quickly back to work, the weavers began their work.

Progress was quick and the only real question of the day was about those darn edges!!!!! I’m of the opinion that you shouldn’t need to fidget with them, and yet….. if that’s the only thing that brings results for you…….   The ladies did convince me that the selvage loops are a result of my method of beating…… humility is a very good lesson;0)

The student using mohair for weft opted to remove her piece from the loom although it wasn’t complete, so I could demonstrate hem stitching, and she was a quick study and did a great job. We then moved to the sink with the sample fabric (approx 18″ long) and wet-finished it. At that point, the ladies pack it up and we said our Goodbyes.  I’m thankful to have met/re-met these ladies and hope they are new friends. On student asked about a local guild and I told her that Richmond used to have, and may still have 2 weaver’s guilds. James River Weavers was one guild and Richmond Weavers Guild is the other. There is also a spinning guild in Richmond: Clothos Children. I’ve heard that Clothos Children are active in a variety of the fiber arts.

Weave Joyfully!

Advertisements




Studio closing- temporarily

2 11 2010

Word does seem to have gotten out. Yes, the studio is closing, but the plan is to close from 3/31/2011 and re-open on 4/1/2012. I’m taking a year to cycle 15,000 miles or so around the U.S. including Alaska, and can’t keep the studio open during that time. It’s been so much fun acquiring my equipment, that I want to do it all again upon my return, so what I have is or will be for sale.

The studio needs to continue to pay for itself until the lease is up  at the end of March, so people are viewing, and making deposits on their equipment or buying it and leaving it until the end of  March.

Equipment for sale is as follows (date it can be removed from the studio is in parenthesis):

Leclerc Tissart upright tapestry loom with 2 harnesses                       (immediate removal is available)

Leclerc Artisat 45″ floor loom   – 4 harness                                              (March 25)

Macomber 16 shaft, 48″ loom with 2 sectional beams + much more   (Immediate removal is available)

Macomber 22″    8 shaft loom (baby mac)                                                (Immediate removal)

Harrisville 45″    4 harness floor loom                                                        (March 25)

8 harness Leclerc Compact 24                                                                     (March 25)

Leclerc Penelope, table top tapestry loom                                                  (November 8)

Kromski Fiddle                                                                                                 (November 8)

Beka rigid heddle loom 20″                                                                            (November 8)

Leclerc Bergere                                                                                                 (November 8)

Schacht 4 harness table loom without reed                                               (November 8)

Assorted rigid heddle looms                                                                         (November 8)

Lillstina 4 harness canti-lever loom                2500 texsolve heddles   (Immediately)

Freestanding horizontal warping mill or reel                                             (Immediately)

hand crank bobbin winder                                                                            (immediately)

wooden swift                                                                                                    (immediately)

Strauch drum carder – petite                                                                         (immediately)





Returning to the Studio – Wed. 10/28/09

25 10 2009

Ahhh, we are almost home! We have been on the road since last Sunday at the crack of daylight, traveling to Grand Canyon with all kinds of fun stops along our journey. We found ourselves ‘Standing on a Corner on Winslow, Arizona” just yesterday, gettin’ our kicks on Route 66 the same day! We visited the Grand Canyon, the Gateway Arch in St. Louis, toured the Celestial Seasonings plant, and Schacht Spindle and Loom Company in Boulder, and much more.  It has been an awesome trip. We traveled 700+ miles today, and will do the same tomorrow, finishing our trip on Tues…. a day early….. with a little over 600 miles (WHEW!).  Total miles have not been calculated, but it looks like 4000+ miles for the 8 days.

Don’t ask me how few I drove;0)

I’m looking forward to being back in the studio with you all on Wed. and then Thurs and with the folks in the Learn to Weave in a Weekend class on Sat. and Sunday. I still have an opening in the weaving class this weekend, and a couple of spaces in the Wed. night weaving classes beginning in Nov. Hope you will join us in my weaving and fiber arts studio in Richmond, VA.

C





small loom weaving class – thurs. nights

9 09 2009

I’m beginning a small looms weaving class on Thursday nights from 6:30 – 9:00.

The first session will meet from 9/24 – 10/15.  It’s 10 instructional hours.

This is in the far west end of Richmond, VA.  Contact me if you are interested.  It’s rigid heddle looms, table looms, frame looms, and tapestry looms.

I’ve also posted a couple of wetfelting-by-hand classes. hat-felting, and rug felting, and a weekday and weeknight sewing class.  HOpe this helps some of you that I had to put on the waiting list.  visit the ‘contact me’ page for information on how to reach me if you have questions.  Much love.

Cherri





tapestry off the loom

25 08 2009

UGH, I finally got my tapestry off the loom.  It’s been a lot of fun, but man, that’s killer!

Here is a low quality pic of it.0825091747a





Spinning and weaving in Richmond,va

5 01 2008

I have been advertising my spinning and weaving classes on several online venues, trying to boost enrollment at the Visual Art Center of Richmond. We have pretty good response to the “learn to weave in a weekend”, but are still waiting for enrollment to increase for the regular and ongoing weaving class. It meets on Thursday nights, right here in Richmond, VA. We meet from 6:30 – 9:00. I have room for 8 students. I think I’m offering 4 or 5 sessions of it this spring, so you could actually learn a great deal just this spring alone. You don’t have to have your own loom. Floor looms are provided by the art center. There is also plenty of open studio time, so you can come in outside of class and do various steps outside of class, so you can maximize your instructional time. No previous experience is necessary. If you can’t make it, you can e-mail me, as I frequently have openings at one of my own studios for private lessons, or in one of my studio classes (Wed. nights, or Sunday afternoons).
I sell looms, spinning wheels, fiber for spinning, and yarn for your projects in class. If you are looking for someone to do loom repair, or spinning wheel repair, I do that and sell parts.
The looms I carry are Louet, Leclerc, and whatever used Looms I might have for sale at any given time. Currently, I have a 12 harness mechanical dobby loom by AVL that is for sale. You can e-mail me about that if you are interested. I also have a horizontal warping mill/reel for sale. It’s a floor model, but folded up, it fits behind a door.